|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
High Performance Double-Balanced Mixer, 5 - 1000 MHz V 3.00 MD-113 Features Low Cost Flatpack Conversion Loss: 7 dB Typical Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW max. @ 25C, Derated linearly to 85C @ 3.2 mW/C n IF Port Current: 50 mA Max. n MIL-STD-883 Screening Available n n n n FP-2 Description Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion Loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Pin Configuration Pin No. 1 2 3 4 Function GND GND GND IF Pin No. 5 6 7 8 Function LO GND GND RF Electrical Specifications1: TA = -55C to +85C Parameter Frequency Range Conversion Loss Test Conditions RF, LO Ports IF Port Frequency 5 - 1000 DC - 1000 5 - 50 MHz 50 - 500 MHz 500 - 1000 MHz LO to RF 5 - 50 MHz 50 - 500 MHz 500 - 1000 MHz 5 - 50 MHz 50 - 500 MHz 500 - 1000 MHz 5 - 50 MHz 50 - 500 MHz 500 - 1000 MHz -- Units MHz MHz dB dB dB dB dB dB dB dB dB dB dB dB -- mV 1 dB Compression 1 dB Desensitization dBm dBm Min -- -- -- -- -- 35 30 25 30 25 20 25 20 15 -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- <2 0 -2 Max -- -- 7.5 7.5 8.0 -- -- -- -- -- -- -- -- -- -- -- -- -- Isolation LO to IF RF to IF DC Polarity DC Offset RF Input Negative 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. High Performance Double-Balanced Mixer, 5 - 1000 MHz Electrical Specifications: TA = -55C to +85C Parameter SSB Noise Figure Typical Two Tone IM Ratio Test Conditions Within 1 dB of Conversion Loss Max. With -10 dBm input, each input 25 MHz and 35 MHz IF Frequency -- 100 - 550 MHz 550 - 800 MHz 800 - 1000 MHz Units -- dB dB dB Min -- -- -- -- Typ -- >47 >38 >44 MD-113 V 3.00 Max -- -- -- -- Typical Performance Curves Conversion Loss (RF = -5 dBm, LO = +7 dBm) 8 50 Isolation LO - RF LO - IF RF - IF Conversion Loss (dB) Isolation (dB) 5 10 20 50 100 200 500 1000 40 7 30 6 20 5 10 20 50 100 200 500 1000 Frequency (MHz) Frequency (MHz) Conversion Loss vs. LO Power (LO = 1.060 GHz, RF = 1.000 GHz @ -10 dBm) 10 Ordering Information Part Number MD-113 PIN Package FP-2 9 Loss (dB) 8 7 6 0 5 10 15 20 LO Power (dBm) Specifications subject to change without notice. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2 |
Price & Availability of MD-113PIN |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |